Are you an existing customer or do you want to contact us in a different matter? We look forward to hearing from you and will get back to you as soon as possible.
Alternatively, you may want to contact directly one of our locations or our holding company.
The Coatinc-Network
For enquiries regarding marketing or press matters, please use the following contacts:
The Coatinc Company Holding GmbH
Hüttenstraße 45
57223 Kreuztal
Your contact person:
Anna-Maria Ademaj
marketing@coatinc.com
Headquarter
The Coatinc Company Holding GmbH
Carolinenglückstraße 6-10
44793 Bochum, Germany
Phone: +49 234 52905-0
Fax: +49 234 52905-15
In recent years, hot-dip galvanizing has been increasingly used to provide an additional organic coating to enhance the protection of components exposed to major loads or to combine the customer’s preferred colours with corrosion protection. Essentially, either powder or wet paint coating systems can be applied after hot-dip galvanizing. In most cases, the component surface is first trimmed, swept or given a wet-chemical treatment.
When the durability of a Duplex system with the durability of a conventional system are compared, it becomes clear that combining two systems will significantly increase duration protection duration. This synergy effect can increase service life by a factor of up to 2.5. The Duplex system is effective due to the mutual protection of the two components. The zinc coat is protected from atmospheric and chemical impacts by the additional coating, thereby avoiding wear and tear. Furthermore, the hot-dip galvanizing prevents or delays corrosion creep and detached coating in the event of damage.
Double or multi-layer systems are recommended for coastal or outdoor use in industrial areas, in chemically contaminated environments, for road salt application in tunnels and on bridges and for products which require a long lifespan. Multi-layer systems are standard with or without galvanizing, depending on the requirements profile. Advantages:
1. A pre-treatment is initially performed with a chrome layer, which both seals the pores in the galvanized surface and acts as an etch primer and substrate protection.
2. The application of an epoxide resin onto the substrate then creates a pore density, evens out any unevenness and reaches corners and holes. And last but not least, the epoxide resin acts as a waterproof layer which is resistant to chemical damage.
3. Finally, a polyester or polyurethane coating is applied. This not only ensures a beautiful sheen of colour but also creates a glossy surface finish.
Aus Gründen der besseren Lesbarkeit verzichten wir auf die gleichzeitige Verwendung der Sprachformen männlich, weiblich und divers (m/w/d). Sämtliche Personenbezeichnungen gelten daher gleichermaßen für alle Geschlechter.