galvanizing

Are you an existing customer or do you want to contact us in a different matter? We look forward to hearing from you and will get back to you as soon as possible.

Alternatively, you may want to contact directly one of our locations or our holding company.


    Fields marked with * are mandatory fields.







    Factory *


    Reason for your request *



    Attachment



    Standorte Coatinc Bochum Coatinc Rhein-Main Coatinc Peine Coatinc Becker Saarlouis Coatinc Siegen Coatinc PreGa Coatinc24 Coatinc Würzburg Coatinc Ninove Coatinc NinoCoat Zinkpower Malacky Coatinc MX de SA CV Coatinc US Coatinc Alblasserdam Coatinc24 Amsterdam Coatinc Nederland Coatinc De Meern Coatinc Groningen Coatinc Mook Coatinc Prega NL Coatinc Roermond Coatinc Anox Zinkpower Promptus Zinkpower Ostrava Zinkpower Roudnice Marmara-Siegener Galvaniz Marmara-Siegener Galvaniz Marmara-Siegener Galvaniz Rezinal Coatinc Lenssen ESP Pulverbeschichtung ESP Pulverbeschichtung

    For enquiries regarding marketing or press matters, please use the following contacts:

    Marketing & Press

    The Coatinc Company Holding GmbH
    Hüttenstraße 45
    57223 Kreuztal

    Your contact person:
    Anna-Maria Ademaj
    marketing@coatinc.com

    Holding

    Headquarter
    The Coatinc Company Holding GmbH

    Carolinenglückstraße 6-10
    44793 Bochum, Germany
    Phone: +49 234 52905-0
    Fax: +49 234 52905-15

    Industrial DIN finishing

    Finishing with the lowest standard is finishing according to industrial standard. Here the component is processed according to the standard DIN EN ISO 1461. Which means: all tips and drips are removed or rounded off to an extent that they cannot cause injury. Remaining zinc ash must be removed. Any flaws in the galvanizing are not improved with zinc dust paint as the coating system in the zinc dust paint may not homogenise with that of the later coating. The surface is not polished in this standard, it remains in its original state. Only any larger traces of hard zinc need to be removed. Roller traces and frays are not removed. The welding seam which normally extrudes in conventional galvanizing due to the materials are not filed.

    The manufacturer of the components should note the following when preparing:

    • The edges of the components should be at least broken off and filed in the case of laser edges to exclude later adherence problems.
    • The component surface should have a unified degree of finish (roughness, degree of rust, scarredness …) as this greatly defines the later appearance of the surface of the hot-galvanizing and therefore also the coating.
    • Steels from the ranges 1 and 3 (sebisty steels) should be selected as materials for a subsequent coating, as only these ranges can achieve relative smoothness and thin coats of the surface refiner.
    Recent Posts

    Start typing and press Enter to search

    Gender-Hinweis

    Aus Gründen der besseren Lesbarkeit verzichten wir auf die gleichzeitige Verwendung der Sprachformen männlich, weiblich und divers (m/w/d). Sämtliche Personenbezeichnungen gelten daher gleichermaßen für alle Geschlechter.